Navigation

    蓝鲸ROS机器人论坛

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Popular
    ROS交流群
    ROS Group
    产品服务
    Product Service
    开源代码库
    Github
    官网
    Official website
    技术交流
    Technological exchanges
    激光雷达
    LIDAR
    ROS教程
    ROS Tourials
    深度学习
    Deep Learning
    机器视觉
    Computer Vision

    xiaoqiang tutorial (6) xiaoqiang remote control Windows client

    产品服务
    1
    1
    1538
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • weijiz
      weijiz last edited by weijiz

      Xiaoqiang Homepage

      xiaoqiang remote control Windows client

      The Windows client has merged with Galileo navigation system client, please refer to Galileo navigation system user manual

      The software interface is shown below

      0_1536151295912_54a15fb9-8452-4530-9470-3349e11e04e4-image.png

      Software installation package download Download and double click to install. Follow the instructions and click next all the way.

      0_1536151481564_aff84ba1-4c75-4af7-bbb5-f85b4bc9fc39-image.png

      The first time you start the client, you will see the following prompts. Please tick “Private network and public network” and click to select “Allow access.”

      0_1536151535521_b72c0f94-09a9-412e-b384-3709444fd649-image.png

      Troubleshooting

      Q: Unable to connect after app launched
      A: It may because Xiaoqiang and your computer are not in the same LAN. It is also possible that Xiaoqiang’s server-side program does not start. You can enter sudo service startup restart to restart the server and try again.

      Q: Unable to remote control after successful connection
      A: Check whether driver is working properly. Check whether the serial port USB of the xiaoqiang is properly connected. Then enter rostopic echo /system_monitor/report,If the voltage shows normal, then the platform is normal. If not you can try to restart your service. sudo service startup restart. If the voltage is normal but still can’t move, check if infrared sensors triggered. The infrared sensor will glow red when triggered.

      Q: No video transmission after successful connection
      A: Check if the camera USB is connected properly. Then restart the service and try again.”sudo service startup restart”。 enter rostopic echo /system_monitor/report,If imageStatus is True, shows that the image data is normal. If there is still no image displayed at this time, the client installation is abnormal. Please check the installation steps of the client.

      Xiaoqiang Homepage
      Back To Index

      1 Reply Last reply Reply Quote 0
      • 1 / 1
      • First post
        Last post
      Copyright © 2015-2023 BlueWhale community