Navigation

    蓝鲸ROS机器人论坛

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Popular
    ROS交流群
    ROS Group
    产品服务
    Product Service
    开源代码库
    Github
    官网
    Official website
    技术交流
    Technological exchanges
    激光雷达
    LIDAR
    ROS教程
    ROS Tourials
    深度学习
    Deep Learning
    机器视觉
    Computer Vision

    Hikey 970 USB转串口驱动安装

    技术交流
    usb to serial pl2303 hikey970 usb
    2
    13
    3689
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • robutun
      robutun @weijiz last edited by

      @weijiz 那该如何处理
      我试着下了一个ko文件
      但insmod失败 显示invalid

      weijiz 1 Reply Last reply Reply Quote 0
      • weijiz
        weijiz @robutun last edited by

        @robutun 我更新了这篇文章,现在应该可以了。

        robutun 2 Replies Last reply Reply Quote 0
        • robutun
          robutun @weijiz last edited by

          @weijiz 多谢 等下试试

          1 Reply Last reply Reply Quote 0
          • robutun
            robutun @weijiz last edited by

            @weijiz 不好意思 再来打扰一下
            现在进行到最后一步 sudo modprobe pl2303
            然后就卡在那了 另开窗口lsmod也是同样的没反应

            weijiz 1 Reply Last reply Reply Quote 0
            • weijiz
              weijiz @robutun last edited by

              @robutun 这个我没有遇到过,不太清楚

              robutun 1 Reply Last reply Reply Quote 0
              • robutun
                robutun @weijiz last edited by

                @weijiz 您好。
                最近在hikey970上又遇到一个问题,可能和内核有关。
                我想通过x11vnc远程控制,图形化rviz。
                这个方法是在网上看到的,之前试过其他的方法远程不了rviz。
                现在遇到的是x11vnc开启时,会出现如下错误:
                shmget(scanline)failed
                shmget:function not implemented
                我查了可能的原因是内核中缺少svsv ipc
                我尝试了源码编译内核但没有解决这个问题。
                不知道中间哪一步出错了。
                我的步骤是
                make menuconfig
                make -j8
                make modules_install
                make install
                mkinitramfs 4.** -o /boot/initrd.img-4. **
                update-grub2

                weijiz 1 Reply Last reply Reply Quote 0
                • weijiz
                  weijiz @robutun last edited by

                  @robutun x11vnc我也没法运行,还没成功过

                  robutun 2 Replies Last reply Reply Quote 0
                  • robutun
                    robutun @weijiz last edited by

                    @weijiz 这样啊
                    我不知道能不能通过编译内核来解决
                    你可以试一下

                    1 Reply Last reply Reply Quote 0
                    • robutun
                      robutun @weijiz last edited by

                      @weijiz
                      今天我在x11vnc的官网上看到一个和shmget:Function not implemented差不多的问题
                      FAQ里Q71 有提到x11vnc fail with shmget: No space left on device or Minor opcode of failed request: 1 (X_ShmAttach)?
                      回答里有提出通过禁用shmget来避免这个问题 在x11vnch 后加入-noshm
                      我试过这个方法 成功地打开了rviz
                      我之后再试试内核编译 能不能解决shmget的问题

                      weijiz 1 Reply Last reply Reply Quote 0
                      • weijiz
                        weijiz @robutun last edited by

                        @robutun 感谢分享

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post
                        Copyright © 2015-2021 BlueWhale community